Professional wire stripping and cutting machines for PVC, Teflon, braided, and fiberglass wires. Touch screen and LCD panel models available, processing wire from 0.1mm\u00b2 to 185mm\u00b2. Xiamen Jingwei Technology Co., Ltd. \u2014 stable, durable, 3-year quality guarantee.<\/p>\n
Touch Screen Wire Stripper Series
\nJW-SD\/S – Four-wheel drive wire stripper with touch screen
\nModel: JW-SD\/S
\nWeight: 28KG
\nPower: 300W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 460*470*325mm
\nWire length range: 1\uff5e9999mm
\nStrip length: Front end:0-30;rear end:0-15mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nIntermediate peeling times: 16 times
\nWire cross section: 0.1\uff5e4mm\u00b2
\nMax conduit inside diameter: 6mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=100MM piece\/hour\uff09 4000-5000 pieces
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-SDB\/S – Double wire stripper with touch screen
\nModel: JW-SDB\/S
\nWeight: 28KG
\nPower: 300W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 460*470*325mm
\nWire length range: 1\uff5e9999mm
\nStrip length: Front end:0-30;rear end:0-15mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nIntermediate peeling times: 16 times
\nWire cross section: Double wire 0.1\uff5e2.5mm\u00b2; Single wire 0.1\uff5e4mm\u00b2
\nMax conduit inside diameter: 6mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=100MM piece\/hour\uff09 5000-10000 pieces
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-SDB2\/S – Double wire stripper with touch screen and jump tube
\nModel: JW-SDB2\/S
\nWeight: 28KG
\nPower: 300W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 460*470*325mm
\nWire length range: 1\uff5e9999mm
\nStrip length: Front end:0-30;rear end:0-30mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nIntermediate peeling times: 16 times
\nWire cross section: Double wire 0.1\uff5e2.5mm\u00b2; Single wire 0.1\uff5e4mm\u00b2
\nMax conduit inside diameter: 6mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=100MM piece\/hour\uff09 5000-10000 pieces
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-SDB4\/S – Four wire stripper with touch screen and jump tube
\nModel: JW-SDB4\/S
\nWeight: 37KG
\nPower: 500 W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 460*470*325mm
\nWire length range: 1\uff5e10000mm
\nStrip length: Front end:0-50;rear end:0-30mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nIntermediate peeling times: 16 times
\nWire cross section: BVR Four wire 0.1\uff5e2.5mm\u00b2; BVR Single wire 0.1\uff5e10mm\u00b2
\nMax conduit inside diameter: 6mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=100MM piece\/hour\uff09 3000-10000 pieces
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-E\/S – 6mm\u00b2 touch screen stripper
\nModel: JW-E\/S
\nWeight: 28KG
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nPower: 300W
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 460*470*325mm
\nWire length range: 1\uff5e9999mm
\nStrip length: Front end:0-35;rear end:0-15mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nIntermediate peeling times: 16 times
\nWire cross section: 0.1\uff5e6mm\u00b2
\nMax conduit inside diameter: 8mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: High-speed steel
\nTransport speed: (L=100MM piece\/hour\uff09 3000-5000 pieces
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-JE\/S – 6mm\u00b2 touch screen stripper with jump tube
\nModel: JW-JE\/S
\nWeight: 28KG
\nPower: 300W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 460*470*325mm
\nWire length range: 1\uff5e9999mm
\nStrip length: Front end:0-40;rear end:0-40mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nIntermediate peeling times: 16 times
\nWire cross section: 0.1\uff5e6mm\u00b2
\nMax conduit inside diameter: 8mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: High-speed steel
\nTransport speed: (L=100MM piece\/hour\uff09 3000-4000 pieces
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-JE2\/S – 10mm\u00b2 touch screen stripper with jump tube, Motor lifting conduit
\nModel: JW-JE2\/S
\nWeight: 30KG
\nPower: 450W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 460*470*325mm
\nWire length range: 1\uff5e9999mm
\nStrip length: Front end:0-50;rear end:0-50mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nIntermediate peeling times: 16 times
\nWire cross section: 0.1\uff5e10mm\u00b2 (BV single strand wire 6mm\u00b2)
\nMax conduit inside diameter: 10mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: High-speed steel
\nTransport speed: (L=100MM piece\/hour\uff09 3000-4000 pieces
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-NX2\/S – Double wire twisting machine with touch screen
\nModel: JW-NX2\/S
\nWeight: 38KG
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nPower: 350W
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 460*470*325mm
\nWire length range: 1\uff5e9999mm
\nStrip length: Front end:0-30;rear end:0-20mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nWire cross section: Double wire 0.1\uff5e2.5mm\u00b2; Single wire 0.1\uff5e4mm\u00b2
\nMax conduit inside diameter: 6mm
\nTwisting method: Double ended or single ended
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=100MM piece\/hour\uff09 3000-6000 pieces
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-HT2\/S – Round sheath wire stripper with touch screen
\nModel: JW-HT2\/S
\nWeight: 30KG
\nPower: 450W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 460*470*325mm
\nWire length range: 1\uff5e9999mm
\nStrip length: Front end:0-150;rear end:0-100mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nWire cross section: Maximum outer diameter: 10mm (Round sheath wire)
\nMax conduit inside diameter: 11mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=200MM piece\/hour\uff09 2000-3000 pieces
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-HT2\/6S – HT2 upgraded 6-wheel round sheath wire stripper with touch screen
\nModel: JW-HT2\/6S
\nWeight: 43KG
\nPower: 550W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 560*460*365mm
\nWire length range: 1\uff5e9999mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nWire cross section: Maximum outer diameter: 12mm (Round sheath wire)
\nMax conduit inside diameter: 13mm
\nBlade material: High-speed steel
\nTransport speed: (L=200MM piece\/hour\uff09 2000-3000 pieces
\nStrip length: Full stripping of front end:0-200;Full stripping of rear end:0-100mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-MAX1-4S – 4 wheels, 25mm\u00b2 wire stripper with touch screen
\nModel: JW-MAX1-4S
\nWeight: 33KG
\nPower: 450W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 460*470*325mm
\nWire length range: 1\uff5e9999mm
\nStrip length: Front end:0-30; rear end:0-20mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nIntermediate peeling times: 16 times
\nWire cross section: 0.2\uff5e25mm\u00b2 (BV single strand wire 6mm\u00b2)
\nMax conduit inside diameter: 11mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: High-speed steel
\nTransport speed: (L=100MM piece\/hour\uff09 3000-4000 pieces
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-MAX1-6S – 6 wheels, 25mm\u00b2 wire stripper with touch screen
\nModel: JW-MAX1-6S
\nWeight: 43KG
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nPower: 550W
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 560*460*365mm
\nWire length range: 1\uff5e9999mm
\nStrip length: Front end:0-80; rear end:0-80mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nIntermediate peeling times: 16 times
\nWire cross section: 0.2\uff5e25mm\u00b2 (BV single strand wire 6mm\u00b2)
\nMax conduit inside diameter: 11mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: High-speed steel
\nTransport speed: (L=100MM piece\/hour\uff09 3000-4000 pieces
\nDriving mode: six-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-MAX1-8S – 8 wheels, 25mm\u00b2 wire stripper with lifting wheel and touch screen
\nModel: JW-MAX1-8S
\nWeight: 50KG
\nPower: 650W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 4.3 inch Chinese and English switching touch screen display
\nMachine dimension: 560*460*365mm
\nWire length range: 1\uff5e9999mm
\nStrip length: Front end:0-80; rear end:0-80mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nIntermediate peeling times: 16 times
\nWire cross section: 0.2\uff5e25mm\u00b2 (BV single strand wire 6mm\u00b2)
\nMax conduit inside diameter: 11mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: High-speed steel
\nTransport speed: (L=100MM piece\/hour\uff09 3000-4000 pieces
\nDriving mode: eight-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-YHT6-4 – Four round high speed sheath inner and outer double layer peeling machine
\nModel: JW-YHT6-4
\nWeight: 40KG
\nPower: 350W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 5 inch Chinese and English switching touch screen display
\nMachine dimension: 560*460*365mm
\nWire cross section: 2-9mm (Round sheath wire)
\nNumber of wire cores that can be processed: 2 cores, 3 cores, 4 cores,5cores
\nAir pressure: 0.8Mpa
\nLength accuracy: \u00b1 0.2mm
\nMax conduit inside diameter: 10mm
\nWire length range: Max 10000mm
\nOuter wire strip length: Full stripping of front end:1-150mm; Full stripping of rear end:1-100mm
\nInner core strip length: Front end:0-20; rear end:0-20mm
\nBlade material: high-speed steel
\nTransport speed: (L=300MM piece\/hour\uff091500-3000 pieces
\nDriving mode: four-wheels drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-YHT6-6 – Six round high speed sheath inner and outer double layer peeling machine
\nModel: JW-YHT6-6
\nWeight: 45KG
\nPower: 550W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 5 inch Chinese and English switching touch screen display
\nMachine dimension: 560*460*365mm
\nWire cross section: 2-10mm (Round sheath wire)
\nNumber of wire cores that can be processed: 2 cores, 3 cores, 4 cores,5cores
\nAir pressure: 0.8Mpa
\nLength accuracy: \u00b1 0.2mm
\nMax conduit inside diameter: 11mm
\nWire length range: Max 10000mm
\nOuter wire strip length: Full stripping of front end:1-210mm; Full stripping of rear end:1-100mm
\nInner core strip length: Front end:0-20; rear end:0-20mm
\nBlade material: high-speed steel
\nTransport speed: (L=300MM piece\/hour\uff091500-3000 pieces
\nDriving mode: six-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-YHT6-8 – Eight round high speed sheath inner and outer double layer peeling machine
\nModel: JW-YHT6-8
\nWeight: 50KG
\nPower: 650W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 5 inch Chinese and English switching touch screen display
\nMachine dimension: 560*460*365mm
\nWire cross section: 2-11mm (Round sheath wire)
\nNumber of wire cores that can be processed: 2 cores, 3 cores, 4 cores,5cores
\nAir pressure: 0.8Mpa
\nLength accuracy: \u00b1 0.2mm
\nMax conduit inside diameter: 13mm
\nWire length range: Max 10000mm
\nOuter wire strip length: Full stripping of front end:1-210mm; Full stripping of rear end:1-110mm
\nInner core strip length: Front end:0-20; rear end:0-20mm
\nBlade material: high-speed steel
\nTransport speed: (L=300MM piece\/hour\uff091500-3500 pieces
\nDriving mode: eight-wheels drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-YHT6-8D – Eight round double line high speed sheath inner and outer peeling machine
\nModel: JW-YHT6-8D
\nWeight: 50KG
\nPower: 650W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 5 inch Chinese and English switching touch screen display
\nMachine dimension: 560*460*365mm
\nWire cross section: Double wire 2-6mm (Round sheath wire)
\nNumber of wire cores that can be processed: 2 cores, 3 cores, 4 cores,5cores
\nAir pressure: 0.8Mpa
\nLength accuracy: \u00b1 0.2mm
\nMax conduit inside diameter: 7mm
\nWire length range: Max 10000mm
\nOuter wire strip length: Full stripping of front end:1-210mm; Full stripping of rear end:1-110mm
\nInner core strip length: Front end:0-20; rear end:0-20mm
\nBlade material: high-speed steel
\nTransport speed: (L=300MM piece\/hour\uff091500-6000 pieces
\nDriving mode: eight-wheels drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-YHT5 – Multi-function intelligent sheath inner and outer peeling machine, motor lift wheel
\nModel: JW-YHT5
\nWeight: 50KG
\nPower: 650W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 7 inch Chinese and English switching touch screen display
\nMachine dimension: 560*460*365mm
\nWire cross section: 2-12mm (Round sheath wire)
\nNumber of wire cores that can be processed: 2 cores, 3 cores, 4 cores,5cores
\nAir pressure: 0.8Mpa
\nLength accuracy: \u00b1 0.2mm
\nMax conduit inside diameter: 13mm
\nWire length range: Max 10000mm
\nOuter wire strip length: Full stripping of front end:1-210mm; Full stripping of rear end:1-110mm
\nSecond stripping and Half stripping of front end: 1-350;
\nHalf stripping of rear end: 1-150mm
\nInner core strip length: Front end:0-20; rear end:0-20mm
\nBlade material: high-speed steel
\nTransport speed: (L=300MM piece\/hour\uff091500-6000 pieces
\nDriving mode: eight-wheels drive (silent hybrid stepper motor, 0.1mm forward per step)
\n______________________________________________________________________
\nJW-16ZW – 16 mm\u00b2 Two-end peeling and bending machine
\nModel: JW-16ZW
\nWeight: 35KG
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nPower: 500W
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nStrip length: Front end:0.1-30;rear end:0.1-20mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nWire cross section: 1.0\uff5e16mm\u00b2
\nMax conduit inside diameter: 11mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: High-speed steel
\nBending speed: (L=200MM piece\/hour\uff09 2000-3000 pieces
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nBending shape: U-shaped, Z-shaped, clockwise and counterclockwise bending, adjustable bending angle of 30 degrees, 45 degrees, 60 degrees and 90 degrees
\n______________________________________________________________________
\nJW-25ZW – 25 mm\u00b2 Two-end peeling and bending machine
\nModel: JW-25ZW
\nWeight: KG
\nMachine dimension: 470*515*380mm
\nPower: 650W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: English\/Chinese (7-inch touch screen)
\nAir pressure: 0.4-0.6Mpa
\nWire cross section: 1.0\uff5e25mm\u00b2
\nMax conduit inside diameter: 13mm
\nPeeling accuracy: \u00b10.2mm
\nStrip length: Front end:0-30; rear end:0-20mm
\nBending speed: (L=200MM piece\/hour\uff09 2000-3000 pieces
\nBending shape: U-shaped, Z-shaped, clockwise and counterclockwise bending, adjustable bending angle of 30 degrees, 45 degrees, 60 degrees, 90 degrees~180 degrees
\nBlade material: High-speed steel
\n______________________________________________________________________
\nJW-QG-2S – Multi-functional pipe 2 wheels Cutting machine
\nModel: JW-QG-2S
\nWeight: 23KG
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nPower: 150W
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1\uff5e9999mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nMax conduit inside diameter: 10mm
\nDimension of flat tube: length 100mm*width 22mm* height 4mm
\nWire material: yellow wax tube, heat shrinkable tube, sleeve
\nBlade material: hard tungsten steel
\nTransport speed: (L=100MM piece\/hour\uff09 10000 pieces
\nDriving mode: two-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-QG-4S – Multi-functional pipe 4 wheels Cutting machine
\nModel: JW-QG-4S
\nWeight: 28KG
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nPower: 250W
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1\uff5e9999mm
\nLength accuracy: \u00b1 (0.002xL)mm
\nMax conduit inside diameter: 10mm
\nDimension of flat tube: length 100mm*width 22mm* height 4mm
\nWire material: yellow wax tube, heat shrinkable tube, sleeve
\nBlade material: hard tungsten steel
\nTransport speed: (L=100MM piece\/hour\uff09 10000 pieces
\nDriving mode: two-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-MAX2-ST35 – 35mm\u00b2 motor lifting conduit, motor screw lifting wheel ,Knife holder with stepper motor
\nModel: JW-MAX2-ST35
\nMachine dimension: 560*460*400mm
\nWeight: 80KG
\nPower: 600W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 7 inch Chinese and English switching touch screen display
\nWire cross section: MAX 13mm (Round sheath wire) Wire cross section: 1.0~35mm\u00b2 (BV wire maximum 35mm\u00b2, BVR wire maximum 50mm\u00b2)
\nMax conduit inside diameter: 14mm (Motor driven jump tube, no need to connect air pump)
\nWire length range: Max 100m
\nRound sheath outer wire strip length: Front end:1-150mm, rear end:1-100mm 50mm\u00b2 wire strip length\uff1aFront end:1-80mm; rear end:1-80mm
\nBlade material: high-speed steel
\nTransport speed: (L=200mm\uff09 2500~3000pieces \/hour
\nDrive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
\nDriving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
\nWire Capacity: BV wire maximum 35mm\u00b2, BVR wire maximum 50mm\u00b2
\n______________________________________________________________________
\nJW-MAX2-ST50 – 50mm\u00b2motor lifting conduit, motor screw lifting wheel ,Knife holder with stepper motor
\nModel: JW-MAX2-ST50
\nMachine dimension: 650*570*425mm
\nWeight: 108KG
\nPower: 800W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 7 inch Chinese and English switching touch screen display
\nWire cross section: MAX 13mm (Round sheath wire) Wire cross section: 1.0~50mm\u00b2 (BV wire maximum 50mm\u00b2, BVR wire maximum 70mm\u00b2)
\nLength accuracy: \u00b1 0.2mm
\nMax conduit inside diameter: 17mm (Motor driven jump tube, no need to connect air pump)
\nWire length range: Max 100m
\nRound sheath outer wire strip length: Front end:1-200mm, rear end:1-150mm 50mm\u00b2 wire strip length\uff1aFront end:1-100mm; rear end:1-100mm
\nBlade material: high-speed steel
\nTransport speed: (L=200mm\uff09 3000~3500pieces \/hour
\nDrive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
\nDriving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
\nWire Capacity: BV wire maximum 50mm\u00b2, BVR wire maximum 70mm\u00b2
\n______________________________________________________________________
\nJW-MAX2-ST70 – 70mm\u00b2 motor lifting conduit, motor screw lifting wheel ,Knife holder with stepper motor
\nModel: JW-MAX2-ST70
\nMachine dimension: 650*570*425mm
\nWeight: 108KG
\nPower: 1000W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 7 inch Chinese and English switching touch screen display
\nWire cross section: MAX 15mm (Round sheath wire) Wire cross section: 1.0~70mm\u00b2 (BV wire maximum 50mm\u00b2, BVR wire maximum 70mm\u00b2)
\nLength accuracy: \u00b1 0.2mm
\nMax conduit inside diameter: 20mm (Motor driven jump tube, no need to connect air pump)
\nWire length range: Max 100m
\nRound sheath outer wire strip length: Front end:1-200mm, rear end:1-150mm
\nStrip length: Front end:1-100mm; rear end:1-100mm
\nBlade material: high-speed steel
\nTransport speed: (L=200mm\uff09 2500~3000pieces \/hour
\nDrive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
\nDriving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
\nWire Capacity: BV wire maximum 50mm\u00b2, BVR wire maximum 70mm\u00b2
\n______________________________________________________________________
\nJW-MAX2-S70 – 70mm\u00b2 motor lifting conduit, motor screw lifting wheel ,Knife holder with servo motor
\nModel: JW-MAX2-S70
\nMachine dimension: 650*570*425mm
\nWeight: 108KG
\nPower: 2000W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 7 inch Chinese and English switching touch screen display
\nWire cross section: MAX 15mm (Round sheath wire) Wire cross section: 1.0~70mm\u00b2 (BV wire maximum 50mm\u00b2, BVR wire maximum 70mm\u00b2)
\nLength accuracy: \u00b1 0.2mm
\nMax conduit inside diameter: 20mm (Motor driven jump tube, no need to connect air pump)
\nWire length range: Max 100m
\nRound sheath outer wire strip length: Front end:1-200mm, rear end:1-150mm 70mm\u00b2 wire strip length\uff1aFront end:1-100mm; rear end:1-100mm
\nBlade material: high-speed steel
\nTransport speed: (L=200mm\uff09 3000~3500pieces \/hour
\nDrive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
\nDriving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
\nDrive method of knife holder: servo motor driver, ball grinding screw
\n______________________________________________________________________
\nJW-MAX2-ST95 – 95mm\u00b2 motor lifting conduit, motor screw lifting wheel ,Knife holder with stepper motor
\nModel: JW-MAX2-ST95
\nMachine dimension: 675*600*1180mm
\nWeight: 130KG
\nPower: 1500W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 7 inch Chinese and English switching touch screen display
\nWire cross section: MAX 18mm (Round sheath wire) Wire cross section: 1.0~95mm\u00b2 (BV wire maximum 50mm\u00b2, BVR wire maximum 95mm\u00b2)
\nLength accuracy: \u00b1 0.2mm
\nMax conduit inside diameter: 22mm (Motor driven jump tube, no need to connect air pump)
\nWire length range: Max 100m
\nRound sheath outer wire strip length: Front end:1-200mm, rear end:1-150mm 95mm\u00b2 wire strip length\uff1aFront end:1-100mm; rear end:1-100mm
\nBlade material: high-speed steel
\nTransport speed: (L=200mm\uff09 2500~3000pieces \/hour
\nDrive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
\nDriving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
\nWire Capacity: BV wire maximum 50mm\u00b2, BVR wire maximum 95mm\u00b2
\n______________________________________________________________________
\nJW-MAX2-S95 – 95mm\u00b2 motor lifting conduit, motor screw lifting wheel ,Knife holder with servo motor
\nModel: JW-MAX2-S95
\nMachine dimension: 675*600*1180mm
\nWeight: 130KG
\nPower: 3000W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 7 inch Chinese and English switching touch screen display
\nWire cross section: MAX 18mm (Round sheath wire) Wire cross section: 1.0~95mm\u00b2 (BV wire maximum 70mm\u00b2, BVR wire maximum 95mm\u00b2)
\nLength accuracy: \u00b1 0.2mm
\nMax conduit inside diameter: 22mm (Motor driven jump tube, no need to connect air pump)
\nWire length range: Max 100m
\nRound sheath outer wire strip length: Front end:1-200mm, rear end:1-150mm
\nStrip length: Front end:1-100mm; rear end:1-100mm
\nBlade material: high-speed steel
\nTransport speed: (L=200mm\uff09 3000~3500pieces \/hour
\nDrive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
\nDriving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
\nDrive method of knife holder: servo motor driver, ball grinding screw
\nWire Capacity: BV wire maximum 70mm\u00b2, BVR wire maximum 95mm\u00b2
\n______________________________________________________________________
\nJW-MAX3-S185 – 185mm\u00b2 motor lifting conduit, motor screw lifting wheel ,Knife holder with servo motor
\nModel: JW-MAX3-S185
\nMachine dimension: 1260*830*1170mm
\nWeight: 275KG
\nPower: 4000W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: 7 inch Chinese and English switching touch screen display
\nWire cross section: MAX 25mm (Round sheath wire) Wire cross section: 2.5~185mm\u00b2 (BV wire maximum 120mm\u00b2, BVR wire maximum 185mm\u00b2)
\nLength accuracy: \u00b1 0.2mm
\nMax conduit inside diameter: 27mm (Motor driven jump tube, no need to connect air pump)
\nWire length range: Max 400m
\nRound sheath outer wire strip length: Front end:1-500mm, rear end:1-300mm
\nStrip length: Front end:1-150mm; rear end:1-150mm
\nBlade material: high-speed steel
\nTransport speed: (L=500mm\uff09 1500~2000pieces \/hour
\nDrive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
\nDriving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
\nDrive method of knife holder: servo motor driver, ball grinding screw
\nWire Capacity: BV wire maximum 120mm\u00b2, BVR wire maximum 185mm\u00b2
\n______________________________________________________________________
\nKey Panel Model Series (Protective Cover Optional)
\nJW-C\/N – Two-wheel drive wire stripper
\nModel: JW-C\/N
\nWeight: 25KG
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nPower: 200W
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 420*390*260mm
\nWire length range: 1-10000mm
\nStrip length: Front end:0-30;rear end:0-15mm
\nLength accuracy: +\/- (0.002xL)mm
\nIntermediate peeling times: 13 times
\nWire cross section: 0.1-2.5mm2
\nMax conduit inside diameter: 6mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=100mm) 4000-5000 pieces\/hour
\nDriving mode: two-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-SD\/N – Four-wheel drive wire stripper
\nModel: JW-SD\/N
\nWeight: 28KG
\nPower: 300W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1-10000mm
\nStrip length: Front end:0-30;rear end:0-15mm
\nLength accuracy: +\/- (0.002xL)mm
\nIntermediate peeling times: 13 times
\nWire cross section: 0.1-4mm2
\nMax conduit inside diameter: 6mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=100mm) 4000-5000 pieces\/hour
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-SDB\/N – Double wire stripper
\nModel: JW-SDB\/N
\nWeight: 28KG
\nPower: 300W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1-10000mm
\nStrip length: Front end:0-30;rear end:0-15mm
\nLength accuracy: +\/- (0.002xL)mm
\nIntermediate peeling times: 13 times
\nWire cross section: Double wire 0.1-2.5mm2; Single wire 0.1-4mm2
\nMax conduit inside diameter: 6mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=100mm) 5000-10000 pieces\/hour
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-SDB2\/N – Double wire stripper with jump tube
\nModel: JW-SDB2\/N
\nWeight: 28KG
\nPower: 300W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1-10000mm
\nStrip length: Front end:0-30;rear end:0-30mm
\nLength accuracy: +\/- (0.002xL)mm
\nIntermediate peeling times: 13 times
\nWire cross section: Double wire 0.1-2.5mm2; Single wire 0.1-4mm2
\nMax conduit inside diameter: 6mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=100mm) 5000-10000 pieces\/hour
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-E\/N – 6mm2 thick wire stripper
\nModel: JW-E\/N
\nWeight: 28KG
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nPower: 300W
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1-10000mm
\nStrip length: Front end:0-35;rear end:0-15mm
\nLength accuracy: +\/- (0.002xL)mm
\nIntermediate peeling times: 13 times
\nWire cross section: 0.1-6mm2
\nMax conduit inside diameter: 8mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: High-speed steel
\nTransport speed: (L=100mm) 3000-5000 pieces\/hour
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-JE\/N – 6mm2 thick wire stripper with jump tube
\nModel: JW-JE\/N
\nWeight: 28KG
\nPower: 300W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1-10000mm
\nStrip length: Front end:0-40;rear end:0-40mm
\nLength accuracy: +\/- (0.002xL)mm
\nIntermediate peeling times: 13 times
\nWire cross section: 0.1-6mm2
\nMax conduit inside diameter: 8mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: High-speed steel
\nTransport speed: (L=100mm) 3000-5000 pieces\/hour
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-JE2\/N – 10mm2 thick wire stripper with jump tube
\nModel: JW-JE2\/N
\nWeight: 30KG
\nPower: 450W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1-10000mm
\nStrip length: Front end:0-50;rear end:0-50mm
\nLength accuracy: +\/- (0.002xL)mm
\nIntermediate peeling times: 13 times
\nWire cross section: 0.1-10mm2
\nMax conduit inside diameter: 10mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: High-speed steel
\nTransport speed: (L=100mm) 3000-5000 pieces\/hour
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-HT2\/N – Round sheath wire stripper
\nModel: JW-HT2\/N
\nWeight: 28KG
\nPower: 450W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1-10000mm
\nStrip length: Half stripping of front end:0-150;
\nHalf stripping of rear end: 0-100mm
\nLength accuracy: +\/- (0.002xL)mm
\nWire cross section: Maximum outer diameter: 10mm (Flat sheath wire)
\nMax conduit inside diameter: Flat tube size can be customized
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=200mm) 2000-3000 pieces\/hour
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-BHT2\/N – Flat sheath wire stripper
\nModel: JW-BHT2\/N
\nWeight: 28KG
\nPower: 450W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1-10000mm
\nStrip length: Half stripping of front end:0-150;
\nHalf stripping of rear end: 0-100mm
\nLength accuracy: +\/- (0.002xL)mm
\nWire cross section: Maximum outer diameter: 10mm (Flat sheath wire)
\nMax conduit inside diameter: Flat tube size can be customized
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=200mm) 2000-3000 pieces\/hour
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-HT2\/6N – Upgraded 6-wheel round sheath wire stripper
\nModel: JW-HT2\/6N
\nWeight: 43KG
\nMachine dimension: 560*460*365mm
\nPower: 550W
\nOperation interface: English\/Chinese (LCD display)
\nWire length range: 1-10000mm
\nLength accuracy: +\/- (0.002xL)mm
\nWire cross section: Maximum outer diameter: 12mm (Round sheath wire)
\nMax conduit inside diameter: 13mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nStrip length: Full stripping of front end:0-200;Full stripping of rear end:0-100mm
\nBlade material: High-speed steel
\nTransport speed: (L=200mm) 3000-4000 pieces\/hour
\n______________________________________________________________________
\nJW-PX2-S – Flat wire branching machine, max 12P
\nModel: JW-PX2-S
\nWeight: 34KG
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nPower: 450W
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1-10000mm
\nStrip length: Front end:0-15;rear end:0-15mm
\nLength accuracy: +\/- (0.002xL)mm
\nBranching wire width: 2-12P
\nDimension of flat tube: length 100mm*width 22mm* height 4mm
\nSuitable for stripping wire: flat wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=100mm) 3000-5000 pieces\/hour
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-NX2\/N – Double wire stripping and twisting machine
\nModel: JW-NX2\/N
\nWeight: 38KG
\nPower: 350W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1-10000mm
\nStrip length: Front end:0-30;rear end:0-20mm
\nLength accuracy: +\/- (0.002xL)mm
\nWire cross section: Double wire 0.1-2.5mm2; Single wire 0.1-4mm2
\nMax conduit inside diameter: 6mm
\nTwisting method: Double ended or single ended
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: hard tungsten steel
\nTransport speed: (L=100mm) 3000-6000 pieces\/hour
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed, wire feeding speed and twisting speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-MAX1-4\/N – 4 wheels, 25mm2 wire stripper
\nModel: JW-MAX1-4\/N
\nWeight: 31KG
\nPower: 450W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 460*470*325mm
\nWire length range: 1-10000mm
\nStrip length: Front end:0-30;rear end:0-20mm
\nLength accuracy: +\/- (0.002xL)mm
\nIntermediate peeling times: 13 times
\nWire cross section: 0.2-25mm2 (BV single strand wire 6mm2)
\nMax conduit inside diameter: 11mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: High-speed steel
\nTransport speed: (L=100mm) 3000-4000 pieces\/hour
\nDriving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-MAX1-6\/N – 6 wheels, 25mm2 wire stripper
\nModel: JW-MAX1-6\/N
\nWeight: 43KG
\nPower: 550W
\nElectrical connection: 110V\/220V 50HZ\/60HZ
\nOperation interface: English\/Chinese (LCD display)
\nMachine dimension: 560*460*365mm
\nWire length range: 1-10000mm
\nStrip length: Front end:0-80;rear end:0-80mm
\nLength accuracy: +\/- (0.002xL)mm
\nIntermediate peeling times: 13 times
\nWire cross section: 0.2-25mm2 (BV single strand wire 6mm2)
\nMax conduit inside diameter: 11mm
\nWire material: PVC,Teflon,Braided,Fiberglass wire
\nBlade material: High-speed steel
\nTransport speed: (L=100mm) 3000-4000 pieces\/hour
\nDriving mode: six-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nJW-MAX1-8\/N – 8 wheels, 25mm2 wire stripper with lifting wheel
\nModel: JW-MAX1-8\/N
\nWeight: 50KG
\nMachine dimension: 560*460*365mm
\nPower: 650W
\nOperation interface: English\/Chinese (LCD display)
\nWire length range: 1-10000mm
\nStrip length: Front end:0-80;rear end:0-80mm
\nLength accuracy: less than 0.002xL mm
\nWire cross section: 0.2-25mm2 (BV single strand wire 6mm2)
\nMax conduit inside diameter: 11mm
\nIntermediate peeling times: 13 times
\nBlade material: High-speed steel
\nTransport speed: (L=100mm) 3000-5000 pieces\/hour
\nDriving mode: eight-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
\nStripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
\n______________________________________________________________________
\nXiamen Jingwei Technology Co., Ltd.<\/p>\n
Xiamen Jingwei Technology Co., Ltd. (JINGWEI TECH) manufactures automatic wire harness processing equipment \u2014 cutting, stripping, crimping, coiling, binding and taping machines \u2014 exported worldwide with OEM\/ODM support and a 1-year warranty. Browse our full machine catalog<\/a> or request a quote<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":" Professional wire stripping and cutting machines for PVC, Teflon, braided, and fiberglass wires. Touch screen and LCD panel models available, processing wire from 0.1mm\u00b2 to 185mm\u00b2. Xiamen Jingwei\u2026<\/p>\n","protected":false},"author":0,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[209],"tags":[],"class_list":["post-3560","post","type-post","status-publish","format-standard","hentry","category-blog"],"_links":{"self":[{"href":"https:\/\/wiretyingmachine.com\/fr\/wp-json\/wp\/v2\/posts\/3560","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wiretyingmachine.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wiretyingmachine.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/wiretyingmachine.com\/fr\/wp-json\/wp\/v2\/comments?post=3560"}],"version-history":[{"count":0,"href":"https:\/\/wiretyingmachine.com\/fr\/wp-json\/wp\/v2\/posts\/3560\/revisions"}],"wp:attachment":[{"href":"https:\/\/wiretyingmachine.com\/fr\/wp-json\/wp\/v2\/media?parent=3560"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wiretyingmachine.com\/fr\/wp-json\/wp\/v2\/categories?post=3560"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wiretyingmachine.com\/fr\/wp-json\/wp\/v2\/tags?post=3560"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}