Master the manual operation of your wire stripping and terminal crimping machine. This guide covers essential steps and crucial safety procedures for blade replacement.<\/p>\n
\n\tTerminal wire stripping and crimping machines WPM-2008A2\n<\/p>\n
User\u2019s Manual
\nThank you for purchasing our WPM-2008A2 Wire Stripping Crimping Machine.
\nBefore using the machine, the user must read the user manual carefully, and pay enough attention to safety. Please use the machine properly. The wrong operation will result in surprising trouble or shorten the product’s service life, lowering the functions. Therefore please pay attention.
\nNotice:
\n1.\n <\/p>\n
The purpose of this manual lies in telling the operator about the basic standards, and please obey them during the usage or maintenance of the machine.
\n2.\n <\/p>\n
Users must use, repair, and maintain this machine only after fully understanding the contents of this user manual before using the machine.
\n3. The machine can be installed only by the entitled personnel.
\n4.\n <\/p>\n
Obey the following instructions at any time, if the manual isn’t understood, please consult with the manufacturer.
\n5. To make that machine work stably and normally, we suggest the customer use a mano stat power supply.
\n6.\n <\/p>\n
The adoption of appropriate power supply incoming lines and good grounding are recommended.
\n7.\n <\/p>\n
Please deliver this user manual to the next proprietor, together with the machine, if this machine is transferred to other people.
\n8.\n <\/p>\n
Please put this book where it can be reached at any time, to use it over a long time. <\/p>\n
Guarantee:
\n1\uff0e\n <\/p>\n
The WPM-2008A2 Stripping & Terminal Crimping Machine\u2019s guarantee period is 12 months from the day of shipment.
\n2\uff0e\n <\/p>\n
The guarantee clauses will not include the damage resulting from the falling, rectification and improvement, improper installation or insufficient usage, service misdirection operation, or machine operation errors.
\n3\uff0e Conveyance and packing charges are paid by the customer. <\/p>\n
1. Generally safe rules<\/p>\n
The following ” dangerous”, ” warning”, ” attention”, and ” reference” are defined as follows:<\/p>\n
\n <\/p>\n
Dangerous: dangerous circumstances where the wrong operation will cause the personnel to die or suffer from a severe wound.
\n \n <\/p>\n
Warning: dangerous circumstance where the wrong operation will cause the person to suffer from a severe or slight wound.
\n \n <\/p>\n
Attention: dangerous circumstances where the wrong operation will cause the person to suffer from a slight wound or cause the articles to be damaged.
\n \n <\/p>\n
Reference: cautions on operation and maintenance. <\/p>\n
Please obey the warning items that this book contains. <\/p>\n
1-1 Cautions before installation
\n
\nAttention\n <\/p>\n
\nPlease read this book in detail before installation and operation of the machine.
\n
\nAttention\n <\/p>\n
machine working environment instruction
\n1. Let the equipment work in an environment that is clean, without dust, has no caustic chemicals, and without strong electromagnetism field interference. Do not place it in a very cold or very hot environment. Keep good ventilation.
\n2.\n <\/p>\n
Electric voltage, frequency deviation. (0. 95~1. 05 AC 220 V, 0. 99~1. 01 50 Hz )
\n3. The adoption of appropriative power supply coming lines and good grounding.
\n4.\n <\/p>\n
If for a long time you don’t use the machine, please turn off the total power supply, and pull out the power supply plug.
\n5. Working environment temperature (5-40 \u00b0 C )
\n6. Working environment’s humidity (<=50% @40 \u00b0 C or 90% @20 \u00b0 C)
\n7. Conveyance and storage environment temperature ( long time:25 \u00b0 C~55 \u00b0 C \/short time:\/70 \u00b0 C).
\n1-2 Cautions before running<\/p>\n
Attention\n <\/p>\n
\nNotice
\n1.\n <\/p>\n
This machine is the professional equipment to process the bushing used in the fields such as cars appliances and communication, etc. This equipment can implement the functions of automatic feeding, measurement, and testing.
\n
\nAttention\n <\/p>\n
Notice
\n2. Users will never be allowed to reform the machine’s mechanisms or electric circuit etc., as it will cause the equipment to be in disorder and unable to carry out a normal function or even bring to the human body some damages that can’t be anticipated.
\n3. Users shouldn’t remove the safety device or the rear cover, or change the position of installation.
\n4. The user shouldn’t wear any loose clothing or wear any personal adornment; otherwise he will suffer from every wound because of touching the top of the machine. <\/p>\n
1-3 Cautions during running
\n
\nAttention\n <\/p>\n
\nSafe cautions
\n1. The cutting knife and roller work state when the machine is running. So absolutely stretch the manual or finger into the connection box or protection cover to touch the cutting knife or rollator to avoid any unnecessary danger.
\n2. to touch any electric part to avoid any electric shock. Only professional personnel can open the cover to carry out maintenance.
\n3. machine’s weight is about 100 Kg. To move it may be dangerous!<\/p>\n
Attention\n <\/p>\n
4. When operating on the cutter holder or the blade, turn off the power supply, and pull out the power supply plug. And don’t put the manual or finger inside the protection to prevent the blade from wounding the finger.
\n5. When replacing the processed material, please turn off the power supply and pull out the power supply plug.
\n6. When removing the waste inside the cutting knife, turn off the powerplay, pull out the power supply plug, and use a manual tool to do it. <\/p>\n
1-4 Repairing and maintenance<\/p>\n
Attention\n <\/p>\n
\n1. Please pull out the power cable while carrying on electric circuit checking etc. Please do not carry on any operation, while the power is on, to avoid the electric shock.
\n2. When replacing the cutter holder or other mechanic parts, turn off the power supply, and pull out the power supply plug, to prevent the blade from wounding the finger and avoids electric shock.
\n3. While just ending the processing, the motor temperature is still very high, therefore you should not touch it.
\nDuring the whole machine working process, especially when it’s just started, do not wear gloves during operation, prevent the gloves from being drawn in. Dangerous!<\/p>\n
\n2. Introduction
\nThe machine adopts advanced electronic control technology, with a high-precision control module and transmission mechanism, it helps strip and crimp at one-time and also with low noise, low power consumption, high efficiency, and so on. For extremely thin wire, the processing of multi-core shielded wire has an obvious effect. The wire range is AWG 18-36.
\nThe machine wire stripping action is driven by cylinder transmission, with high speed and accurate position. By using the vacuum suction mode, Waste is clean, convenient, and simple. The press is driven by a gear reducer, and the pressure is highly accurate. For an un-proficient or proficient operator, the machine can be adjusted by changing the overall speed of the gas valve, to adapt to the operator’s proficiency.
\nIt is our aim that it can reduce the working procedure effectively, reduce the difficulty of the work and improve the working efficiency. At last, we wish to make progress together with colleagues from all.<\/p>\n
3. Specifications and function parameters
\nModel\n <\/p>\n
WPM-2008A2
\nCrimping capacity\n <\/p>\n
14.7kN
\nStroke\n <\/p>\n
30mm
\nPower\n <\/p>\n
AC220V \u00b110%, 50Hz
\nMotor\n <\/p>\n
1\u03c6 230V 250W 4P
\nprocessing Wire range\n <\/p>\n
AWG36~16
\nMain body dimensions\n <\/p>\n
375 mm x 365 mm x 435 mm
\nWeight\n <\/p>\n
Approx.88 kg
\n4. Adjustment
\n4-1 Terminal applicator adjustment: remove the applicator, adjust the terminal and the cutter seat, make the terminal hind feet and core cutter edge alignment, then adjust the feed length.
\n 4-2 Pressure adjustment: \u3010manu\/auto\u3011 key indicator light in a red state, directly press the up\/down key, repeatedly adjust pressure height until the requirements. During the adjustment, Please confirm that the compressed air manual switch (manual valve) is closed. Press \u3010manu\/auto\u3011 key when the punch stroke is more than half, light in the green state, and step on the pedal punch can auto reset (back to the origin).
\n4-3 Cutting depth and length adjustment: Adjust the screws according to figure (1) (3), get the right position, and then tighten the fixing screw, and test the \u3010clamp\/cut\u3011 key.
\n4-4 Fixed clamp adjustment: Adjust the positioning screw according to figure (2), get the right position, and then tighten the fixing screw, and test the \u3010clamp\/cut\u3011 key.
\n4-5 Cutting position and terminal location adjustment, loosen the set screw according to figure (3), get the right position, and then tighten the fixing screw, test the \u3010strip\u3011 key.
\n4-6 test the \u3010test\u3011 key.
\n4-7 Press the key, the indicator light in the green state, step the panel to work the machine<\/p>\n
5. Keyboard
\n <\/p>\n
\u3010clear\u3011: To reset the counter. In the working mode, to clear the present count.
\n\u3010up\u3011In the manual state, upper the slide height
\n\u3010down\u3011In the manual state, lower the slide height
\n\u3010set\u3011Choose the parameter to change, beset OK before leaving the factory.
\n\u3010manu\/auto\u3011Manu state for adjustment, auto state for running machine.
\n\u3010clamp\/cut\u3011Independently fix the clamp or cut a wire during adjustment.
\n\u3010strip\u3011Independently move backward during adjustment.
\n\u3010test\u3011Independently strip wire during adjustment
\n\u3010power\u3011power on or off
\n\u3010light\u3011light on or off
\n\u3010motor\u3011motor start or stop
\n\u3010strip\u3011stripping function on or off.
\nWhen only need crimping function, Please confirm that the compressed air manual switch
\n(manual valve) is close and please connect the air source. When the motor and strip are both
\non, the step foot panel can run the machine with stripping and crimping functions.<\/p>\n
6. Crimping operation process<\/p>\n
warning\n <\/p>\n
Please cut off the power switch before the finger is put into the applicator. The idle crimping and continuous crimping will damage the blade, pay attention, please.<\/p>\n
Please refer to the following items before the operation, and carry on a periodical check on the processed products.
\n6-1 To measure the core crimping height
\n6-1-1 Use the core crimping height micrometer.
\n
\nFig 6.1 To measure the core crimping height<\/p>\n
6-1-2 To measure the insulation height
\nAccording to the terminal specifications, use the method same as that of core height measurement.
\nIf there is no specification, fold the electric wire as shown in the diagram below, the crimping height of the electric wire insulation must ensure that the insulation doesn’t deviate.
\nBut please notice:
\nAfter crimping, do not let the terminal hurt the wire core.
\n
\nFig 6.2 To measure the terminal crimping insulation height
\n6-2 Electric wire and terminal crimping status
\n6-2-1 To feed the electric wire too deeply causes bad crimping.
\nThe conductor can’t be seen
\n <\/p>\n
6-2-2 To feed the electric wire too little causes bad crimping.
\nThe resin can’t be seen.
\n
\nThe core appearance is bad.
\n
\n6-3Terminal deformation is bad
\n6-3-1 There is no tiny raise at the back.
\n
\nwire cutting
\n
\n6-3-2Terminal upper and lower curving angle too big<\/p>\n
6-3-3Terminal left\/right turn-round is too big<\/p>\n
6-3-4Terminal waving too big
\n
\n6-3-5The terminal burr too much
\n <\/p>\n
6-3-6The crimping surface with scars
\n
\nScars, dints
\n
\n7. Repairing and maintenance
\n1. Clean the machine and keep it clean often.
\n2. Give the machine a slider, and tangent slip group into the lubricating oil regularly.
\n3. Pull water into the air filter regularly.
\n4. Clean residual line skin debris every day.
\n5. Regularly check the machine parts, screw loose and timely reinforcement.<\/p>\n
Xiamen Jingwei Technology Co., Ltd. (JINGWEI TECH) manufactures automatic wire harness processing equipment \u2014 cutting, stripping, crimping, coiling, binding and taping machines \u2014 exported worldwide with OEM\/ODM support and a 1-year warranty. Browse our full machine catalog<\/a> or request a quote<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":" Master the manual operation of your wire stripping and terminal crimping machine. This guide covers essential steps and crucial safety procedures for blade replacement. Terminal wire stripping and\u2026<\/p>\n","protected":false},"author":0,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[210],"tags":[],"class_list":["post-3584","post","type-post","status-publish","format-standard","hentry","category-industry-news"],"_links":{"self":[{"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/posts\/3584","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/comments?post=3584"}],"version-history":[{"count":0,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/posts\/3584\/revisions"}],"wp:attachment":[{"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/media?parent=3584"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/categories?post=3584"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/tags?post=3584"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}