Read the user manual for the WPM-303 Tape Wrapping Machine. Learn to select full, point, and multi-segment wrapping modes and operate the machine with the foot pedal.<\/p>\n
Tape wrapping machine
\nUser Manual
\n Please carefully read the Manual before using to correctly and safely use the product<\/p>\n
Introduction
\nThank you for selecting the product first!
\nBefore using the product, please carefully use the Manual and correctly use the product after fully understanding the Manual to ensure the safety of related personnel and device.
\nAbout the Manual
\nThe manual mainly describes the method to wrap parcels with harness tape. The Manual has two versions, a physical version electronic version, and users can ask the dealer for the electronic version.
\nUse range
\nThe Manual provides operation instructions for the product to prompt product development.
\nTarget
\nCommon operator
\nHow to Use the Manual
\nThe Manual describes the operation process, details, and skills of the numerical control tape wrapping machine from easy to difficult step by step.<\/p>\n
Contents\n <\/p>\n
1.\n <\/p>\n
Introduction\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u20264<\/p>\n
2.\n <\/p>\n
Product parameter\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u20265<\/p>\n
3.\n <\/p>\n
Startup step\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u20266<\/p>\n
4.\n <\/p>\n
Tape installation\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u20267<\/p>\n
5.\n <\/p>\n
Function Introduction\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u20268<\/p>\n
6.\n <\/p>\n
Warranty card\u2026\u2026\u2026\u2026.\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u202610<\/p>\n
1.\n <\/p>\n
Introduction<\/p>\n
The chapters mainly describe wrapping features and the range of applications of numerical control tape wrapping machines as shown in the figures below.<\/p>\n
Point wrapping (stop wrapping)<\/p>\n
Tight wrapping<\/p>\n
1\/2 overlap wrapping<\/p>\n
Border wrapping<\/p>\n
Transposed wrapping<\/p>\n
Branch wrapping<\/p>\n
Close wrapping<\/p>\n
Spaced wrapping
\n2. Product parameter<\/p>\n
\uf06c\n <\/p>\n
Operating mode: touch screen, foot pedal
\n\uf06c\n <\/p>\n
Working mode: full wrapping, point wrapping, multi-segment wrapping
\n\uf06c\n <\/p>\n
Power supply: AC110V\uff5eAC220V
\n\uf06c\n <\/p>\n
Air pressure: \u22654P
\n\uf06c\n <\/p>\n
Wrapping length: infinite
\n\uf06c\n <\/p>\n
Wire diameter: 3MM-40MM
\n\uf06c\n <\/p>\n
Tape Specifications: inner diameter: 38MM, outer diameter: \u2264\uffe0140MM, width: \u226420MM (in case of another tape size, please customize tape holder as required)
\n\uf06c\n <\/p>\n
Tape type: PVC \/ lint\/acetate tape (no interleaving paper), etc.
\n\uf06c\n <\/p>\n
Working temperature: 0-45\u2103
\n\uf06c\n <\/p>\n
Humidity: 10-90%RH (no condensation)
\n\uf06c\n <\/p>\n
Cooling mode: Natural wind
\n\uf06c\n <\/p>\n
Max frequency: 12R\/S<\/p>\n
2.\n <\/p>\n
Startup step<\/p>\n
1.\n <\/p>\n
Check whether the machine is mounted on the table firmly
\n2.\n <\/p>\n
Turn on the main power switch
\n3.\n <\/p>\n
Touch the screen to enter the system
\n
\nWelcome to use
\nThe second-generation tape-wrapping machine
\nEnter the system
\n4. Click the screen to select full wrapping, point wrapping, and multi-segment wrapping according to wrapping mode.<\/p>\n
Intelligent tape-wrapping machine
\nWidth\n <\/p>\n
Running speed\n <\/p>\n
Number of circles\n <\/p>\n
Wire diameter
\nWrapping mode
\nFull wrapping\n <\/p>\n
Point wrapping\n <\/p>\n
Multi-segment wrapping
\nParameter interface\n <\/p>\n
Manual interface\n <\/p>\n
Multi-segment settings\n <\/p>\n
System parameter\n <\/p>\n
Tape loading<\/p>\n
4. Tape installation
\n1\n <\/p>\n
Press \u201cReset\u201d
\n
\n2\n <\/p>\n
Press \u201cTape loading\u201d on the screen
\n
\nIntelligent tape-wrapping machine
\nWidth\n <\/p>\n
Running speed\n <\/p>\n
Number of circles\n <\/p>\n
Wire diameter
\nWrapping mode
\nFull wrapping\n <\/p>\n
Point wrapping\n <\/p>\n
Multi-segment wrapping
\nParameter interface\n <\/p>\n
Manual interface\n <\/p>\n
Multi-segment settings\n <\/p>\n
System parameter\n <\/p>\n
Tape loading
\n3\n <\/p>\n
machine head rotates to tape changing position automatically
\n
\nWhen installing, install the tape with the head upward in the tape holder, pull the head into the gap, press \u201cReset\u201d after installing, and confirm that the head is at the operation position.
\n4.\n <\/p>\n
Function description
\nOperation interface
\n
\nIntelligent tape-wrapping machine
\nWidth\n <\/p>\n
Running speed\n <\/p>\n
Number of circles\n <\/p>\n
Wire diameter
\nWrapping mode
\nFull wrapping\n <\/p>\n
Point wrapping\n <\/p>\n
Multi-segment wrapping
\nParameter interface\n <\/p>\n
Manual interface\n <\/p>\n
Multi-segment settings\n <\/p>\n
System parameter\n <\/p>\n
Tape loading
\nFull wrapping
\nSelect \u201cFull wrapping\u201d, tread on the foot pedal to start operating, and press \u201cWheel closure switch\u201d, the machine operates at full speed and stops operation when the foot pedal is released.
\nPoint wrapping:
\nSelect point wrapping, enter the number of circles you want and tread on the foot pedal to start operating, the machine will not stop until the number of circles reaches without treading on the foot pedal.
\nMulti-segment wrapping
\nSelect \u201cMulti-segment wrapping\u201d, and then press \u201cMulti-segment setting\u201d. 50 segments are provided for setting. You can set it according to the length of the wire branch. You should set it as required and the remaining is left. Tread on the foot pedal, and the machine will stop automatically after the first segment is completed, and then you should tread on the foot pedal again and the machine will complete the second segment operation, and so on. After the last segment is completed, you should press \u201cReset\u201d to start the production of a second line.
\nTape width:
\nThe tape width is 20MM generally; the width setting will directly affect the wrapping density.
\nThe smaller the width is, the larger the overlap surface is. The bigger the width is, the smaller the overlap surface is.
\nRunning speed:
\nThe maximum speed is 5, the minimum speed is 1.
\nSeveral turns for point wrapping:
\nSet the number of circles for point wrapping
\n Wire diameter:
\nEdge size can be adjusted according to the wire diameter for two wheels.
\nParameter setting:
\nThe parameter setting is only available for the administrator
\nManual interface (you can set it as required):
\n
\nMotor\n <\/p>\n
Forward\n <\/p>\n
Reverse\n <\/p>\n
Reset\n <\/p>\n
Pole selection\n <\/p>\n
Enable pole
\nRoller\n <\/p>\n
Forward\n <\/p>\n
Reverse\n <\/p>\n
Reset\n <\/p>\n
Safety gate selection\n <\/p>\n
Enable safety gate
\nWheel\n <\/p>\n
Close\n <\/p>\n
Open\n <\/p>\n
Reset\n <\/p>\n
Safety shield off-delay\n <\/p>\n
9.9s<\/p>\n
Wheel\n <\/p>\n
selection\n <\/p>\n
Enable wheel
\nAuto interface\n <\/p>\n
Close to wire diameter position\n <\/p>\n
Full wrapping high-speed delay\n <\/p>\n
9.9s
\nMulti-segment setting
\n
\nSegment 1\n <\/p>\n
Segment 8\n <\/p>\n
Segment 15\n <\/p>\n
Number
\nOf
\nsegments
\nSegment 2\n <\/p>\n
Segment 9\n <\/p>\n
Segment 16\n <\/p>\n
\nSegment 3\n <\/p>\n
Segment 10\n <\/p>\n
Segment 17\n <\/p>\n
\nSegment 4\n <\/p>\n
Segment 11\n <\/p>\n
Segment 18\n <\/p>\n
\nSegment 5\n <\/p>\n
Segment 12\n <\/p>\n
Segment 19\n <\/p>\n
\nSegment 6\n <\/p>\n
Segment 13\n <\/p>\n
Segment 20\n <\/p>\n
Auto interface
\nSegment 7\n <\/p>\n
Segment 14\n <\/p>\n
Segment 21\n <\/p>\n
Next page<\/p>\n
Warranty Card<\/p>\n
Customer name: Model:
\nCustomer address:\n <\/p>\n
Customer telephone:
\nPurchase date: Contact:
\nI. Warranty clauses:
\n1.\n <\/p>\n
Please carefully fill in the Warranty Card when purchasing and returning to our Company to facilitate our maintenance.
\n2.\n <\/p>\n
The machine enjoys free maintenance within one year from the purchase date under the conditions of normal use and the customer should actively assist our Company in maintenance.
\n3.\n <\/p>\n
The customer should pay the cost of accessories in case of accessory replacement out of the warranty period.
\n4.\n <\/p>\n
Within the warranty period, the customer should assume traveling expenses incurred by maintenance caused by human factors.
\nII. Within the warranty period, free maintenance is not available in the following situations:
\n1.\n <\/p>\n
Cutters and wheels are not covered by the warranty.
\n2.\n <\/p>\n
The customer cannot prove that the machine is purchased from our Company.
\n3.\n <\/p>\n
The customer disassembles or modifies the machine without authorization.
\n4.\n <\/p>\n
The fault is caused by falling, collision, and improper voltage.
\n5.\n <\/p>\n
The fault is caused by a natural disaster.<\/p>\n
Xiamen Jingwei Technology Co., Ltd. (JINGWEI TECH) manufactures automatic wire harness processing equipment \u2014 cutting, stripping, crimping, coiling, binding and taping machines \u2014 exported worldwide with OEM\/ODM support and a 1-year warranty. Browse our full machine catalog<\/a> or request a quote<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":" Read the user manual for the WPM-303 Tape Wrapping Machine. Learn to select full, point, and multi-segment wrapping modes and operate the machine with the foot pedal. Tape\u2026<\/p>\n","protected":false},"author":0,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[210],"tags":[],"class_list":["post-3582","post","type-post","status-publish","format-standard","hentry","category-industry-news"],"_links":{"self":[{"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/posts\/3582","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/comments?post=3582"}],"version-history":[{"count":0,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/posts\/3582\/revisions"}],"wp:attachment":[{"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/media?parent=3582"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/categories?post=3582"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/tags?post=3582"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}