{"id":3514,"date":"2026-09-13T03:14:51","date_gmt":"2026-09-13T03:14:51","guid":{"rendered":"https:\/\/wiretyingmachine.com\/?p=3514"},"modified":"2026-09-14T09:00:00","modified_gmt":"2026-09-14T09:00:00","slug":"semi-automatic-soldering-machine-user-manual-technical-specifications-and-operation-guide","status":"publish","type":"post","link":"https:\/\/wiretyingmachine.com\/es\/semi-automatic-soldering-machine-user-manual-technical-specifications-and-operation-guide\/","title":{"rendered":"Semi-Automatic Soldering Machine User Manual | Technical Specifications & Operation Guide"},"content":{"rendered":"

150W Semi-Automatic Soldering Machine user manual \u2014 complete technical specifications, installation guide, control panel instructions, safety precautions, and warranty policy for wire soldering and tin feeding applications.<\/p>\n

150W Semi-Automatic Soldering Machine User Manual
\nPlease read this manual carefully before use.
\nKeep this manual in a safe place for future reference.
\nThank you for purchasing our soldering machine.
\nPlease read this manual carefully before operation.
\nAfter reading, please keep it in a safe place for future reference.
\nThe manufacturer reserves the right of final interpretation.
\n\"\"
\n1. Introduction
\nThe semi-automatic soldering machine is designed for wire soldering and tin feeding in cable processing. It is primarily intended for soldering various types of wires. Custom fixtures can be designed according to different product requirements to solve various soldering challenges, significantly reducing manual labor costs and improving production efficiency.<\/p>\n

\t2. Technical Parameters<\/p>\n\n\n\n\n\n\n\n\n\n
\n

\n\t\t\t\t\t\t
\nWorking
\n Voltage<\/p>\n

<\/b>\n<\/p>\n<\/p>\n<\/td>\n

\n

AC 220V \/ 50Hz<\/p>\n<\/p>\n<\/td>\n<\/tr>\n

\n

\n\t\t\t\t\t\t
\nWorking Air Pressure<\/p>\n

<\/b>\n<\/p>\n<\/p>\n<\/td>\n

\n

2.5 – 4 kg\/cm\u00b2<\/p>\n<\/p>\n<\/td>\n<\/tr>\n

\n

\n\t\t\t\t\t\t
\nRated Power<\/p>\n

<\/b>\n<\/p>\n<\/p>\n<\/td>\n

\n

150W<\/p>\n<\/p>\n<\/td>\n<\/tr>\n

\n

\n\t\t\t\t\t\t
\nWeight<\/p>\n

<\/b>\n<\/p>\n<\/p>\n<\/td>\n

\n

20 kg<\/p>\n<\/p>\n<\/td>\n<\/tr>\n

\n

\n\t\t\t\t\t\t
\nOverall Dimensions<\/p>\n

<\/b>\n<\/p>\n<\/p>\n<\/td>\n

\n

470 x 400 x
\n 370 mm (W x D x H)<\/p>\n<\/p>\n<\/td>\n<\/tr>\n

\n

\n\t\t\t\t\t\t
\nWorking Environment<\/p>\n

<\/b>\n<\/p>\n<\/p>\n<\/td>\n

\n

Normal room
\n temperature<\/p>\n<\/p>\n<\/td>\n<\/tr>\n

\n

\n\t\t\t\t\t\t
\nMaintenance<\/p>\n

<\/b>\n<\/p>\n<\/p>\n<\/td>\n

\n

Daily maintenance<\/p>\n<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

4. Function Introduction
\n4.1 Lifting Cylinder 1 – Soldering Iron Height
\nAdjusts the soldering height of the iron tip. Turn the nut on top of the cylinder to control the downward travel of the soldering iron head.
\n4.2 Lifting Cylinder 2 – Solder Wire Feed Height
\nControls the descent height of the solder wire. Adjust the screw rod at the bottom of the cylinder to set the desired feed position.
\n4.3 Control Display
\nThe digital display allows you to configure the following parameters:
\nWire Feed Amount: The length of solder wire fed out per cycle. 1000 = 1mm, 10000 = 10mm, and so on.
\nWire Retract Amount: The length the solder wire retracts after soldering is complete. This is factory-set and adjustment is not recommended.
\nWire Feed Speed: The speed at which solder wire is fed during the soldering process.
\nSoldering Time: The duration of each soldering cycle (in seconds).
\nRetract Delay: The delay before the solder wire retracts after each soldering cycle, ensuring proper positioning for the next cycle (in seconds).
\nBlow Time: After each soldering cycle, compressed air blows away excess solder residue from the iron tip for clean subsequent operations (in seconds).
\n4.4 205 High-Frequency Soldering Station
\nThe soldering station features intuitive temperature controls:
\n\u25b2 : Increase temperature
\n\u25bc : Decrease temperature
\n*  : Confirm \/ Enter setting
\n5. Pre-Use Precautions
\nPlease observe the following safety precautions before operating the machine.
\nCarefully inspect the equipment to ensure it is in good condition and all accessories are complete.
\nOnly one trained operator should operate the equipment at a time.
\nOperators must receive proper training before operating the machine independently.
\nEnsure the work area is clean, dry, and well-ventilated.
\nDo not touch the soldering iron tip during or immediately after operation to avoid burns.
\nDisconnect power and air supply when not in use or during maintenance.
\n6. Warranty Policy
\nThe product is covered under warranty with the following conditions. In the situations listed below, free warranty service will not be available. If repair is needed, appropriate material and labor costs will apply.
\nThe product has exceeded the warranty period.
\nThe delivery note or warranty card is not available.
\nDamage caused by failure to follow the instructions in this manual for proper use, maintenance, or care.
\nDamage caused by unauthorized disassembly, improper repair, or modification by non-authorized personnel.
\nDamage caused by transportation, dropping, or other actions not attributable to the manufacturer or authorized dealers.
\nDamage caused by force majeure events such as lightning, fire, earthquake, flooding, etc.
\nDamage caused by the buyer’s own actions or third parties.
\nSoldering iron tips are consumable items and are not covered under warranty.\n<\/p>\n

About JINGWEI TECH<\/h3>\n

Xiamen Jingwei Technology Co., Ltd. (JINGWEI TECH) manufactures automatic wire harness processing equipment \u2014 cutting, stripping, crimping, coiling, binding and taping machines \u2014 exported worldwide with OEM\/ODM support and a 1-year warranty. Browse our full machine catalog<\/a> or request a quote<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":"

150W Semi-Automatic Soldering Machine user manual \u2014 complete technical specifications, installation guide, control panel instructions, safety precautions, and warranty policy for wire soldering and tin feeding applications. 150W\u2026<\/p>\n","protected":false},"author":0,"featured_media":3513,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[209],"tags":[],"class_list":["post-3514","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"_links":{"self":[{"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/posts\/3514","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/comments?post=3514"}],"version-history":[{"count":0,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/posts\/3514\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/media\/3513"}],"wp:attachment":[{"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/media?parent=3514"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/categories?post=3514"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wiretyingmachine.com\/es\/wp-json\/wp\/v2\/tags?post=3514"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}